Resource Center›Troubleshooting
Guide 10 · about 7 minutes

Something's not working. Start here.

Almost everything that goes wrong has one of about a dozen causes, and most of them you can fix in under a minute. Find your symptom below.

Try these first

Three checks that resolve a surprising share of problems before you read any further.

  1. Check which brand you're in Use the workspace switcher at the top of the app. Uploads, projects and ads all belong to a single brand and are invisible from another one. "It's disappeared" is usually "I'm in the wrong workspace."
  2. Sign out and back in This clears the majority of stale-session problems, including being bounced back to setup after you've already completed it.
  3. Give processing longer than feels reasonable Cutting and tagging a long source video, generating concepts and rendering an ad all take real time — concepts run 15 to 20 minutes and an ad up to 20 more. You get an email at each stage, so close the tab rather than watching it.

Signing in

The verification email never arrived

Check spam first. Then request a new link — there's a short cooldown between sends, so the button may be briefly unavailable. If your company filters external mail, ask IT to allow mail from videoforce.ai.

My password keeps being rejected when I set it

The form lists its requirements as you type and won't accept anything that doesn't meet them. Work down the checklist on screen — it's usually a missing number or special character rather than length.

My account is locked

Repeated failed sign-in attempts lock an account as a security measure. Running a password reset unlocks it — use the forgot-password link rather than waiting.

I completed setup but keep getting sent back to it

A known edge case where your new account details haven't caught up with your sign-in session. Sign out completely, then sign back in. If it survives a second attempt, contact support rather than repeating the loop — going round again won't clear it.

Uploads

"Unsupported file type. Please upload a .mp4 or .mov video."

Only MP4 and MOV are accepted. AVI, WebM, MKV and raw camera formats are rejected. Convert to MP4 — exporting from almost any phone or editing app produces MP4 by default.

"Videos must be 1 GB or smaller"

That's a hard limit, and under 500MB is the recommendation. Oversized phone videos are usually 4K — re-export at 1080p and the size drops sharply with no meaningful loss, since the finished ad renders at 1080p anyway.

My video is too long

Keep individual source videos under 10 minutes, and note that everything you select for a single ad is capped at 10 minutes of footage in total. Trim long interviews or livestream recordings down to the section where the useful talking happens — you'll get better clips out of it regardless.

I can't add all my files at once

Up to 20 files can be staged in one upload batch. Do the rest in a second batch — there's no limit on how large your library gets overall.

Importing from Instagram doesn't work

Instagram only allows this for Business and Creator accounts. If yours is a personal account, convert it in the Instagram app's settings — it's free and takes about a minute. Failing that, download the files and upload them directly.

The upload stalls partway

Usually a connection issue with a large file. Try a smaller export of the same video, or a wired or stronger connection. Corporate VPNs sometimes interfere with large uploads — worth testing off the VPN if you can.

Clips and the library

My video uploaded but produced no clips

The most likely cause is no audible speech. The system works from what people say — silent b-roll, music-only montages and text-on-screen edits produce nothing to cut. Check the audio: if the speech is buried under music or wind noise, that has the same effect as silence.

My clips came back uncategorized

The system wasn't confident which of the five beats a clip serves, so it left it unlabeled rather than guessing. Uncategorized clips won't be used to build an ad until you assign a beat yourself — open the clip's preview and set it. More on uncategorized clips →

A clip was tagged as the wrong beat

Open it and reassign it. Your choice is used from then on. If you're certain a clip is a great hook and the system filed it elsewhere, you're allowed to overrule it.

A colleague's uploads aren't visible to me

You're in different brands. Switch using the workspace switcher. If their brand isn't in your switcher at all, you haven't been given access to it — ask a Manager or an organization Admin to add you.

Building and generating

I can't continue past the source video step

You have fewer than three source videos selected — the step requires three or more to generate concepts. Select another, or upload one. If a file you uploaded isn't selectable, check it's MP4 or MOV and within the size limit.

"Concept Generation Failed"

Retry first — this often clears on a second attempt. If it fails again, check the source material: every selected video needs audible speech, and your total selected footage must be within 10 minutes. If it keeps failing on footage that meets the requirements, send support the project name.

"Ad Generation Couldn't Be Completed"

The concept was accepted but the final render didn't finish. Retry the generation. If a second attempt fails, contact support with the project and ad name rather than retrying repeatedly.

It's taking far longer than the estimate

If your selected source videos hadn't already been processed into clips, that processing runs first and adds to the total — long videos add more. You'll be emailed when it's done, so there's no benefit to watching the screen. If significantly more time has passed with no email, contact support.

All the concepts look weak

That's a library signal, not a concept signal — one of the five beats is thin across all your footage, most often the problem beat. Add one short clip covering the gap and regenerate rather than settling for the least bad option. How to find the thin beat →

"Monthly ad limit reached"

You've used the ads included in your plan for this cycle. You can add ads individually at a flat rate, or upgrade a tier — and you'll see the price before anything is charged. Your allowance resets on your billing date, shown under Subscription. Billing guide →

Exporting and sharing

My XML download hasn't appeared

Timeline files are packaged in the background rather than delivered instantly — the app tells you it's packaging them and you'll be notified when the download is ready. If you only need to run the ad rather than edit it, download the MP4 instead, which is immediate.

My ad was rejected by Meta or TikTok

That's the platform's own review, not something RealAds controls — the file you download is a standard MP4 and is uploaded to your ad account by you. Read the rejection reason the platform gives, which usually points at a specific claim, a policy category, or text on screen. You can build a different concept from the same library to avoid the flagged element.

I need the ad in a different aspect ratio

Re-export the same ad in the ratio you need. This does not use another ad from your plan allowance. Channels and formats →

Team and access

"The invited email uses a personal/free-provider domain"

Invitations to personal addresses — gmail.com, outlook.com and similar — are blocked. Use your colleague's business email address instead.

A colleague can see things but can't create or edit

They're a Viewer, which can access and view but not create or edit. An Editor can create and edit but has no access to Payments, Settings or Manage Team. A Manager has full access. Change their role from the brand's Manage Team page. Team and permissions →

A brand is missing from my workspace switcher

You haven't been given access to it. An organization owner or admin — who automatically counts as a manager of every brand — can add you.

I can't see plan or billing controls

Billing lives at the organization level and is managed by organization owners and admins, not by brand-level roles. Ask whoever set up your organization.

Contacting support

If none of the above solved it, email support@videoforce.ai. You'll get a faster answer if you include:

  • What you were trying to do, in one sentence
  • The exact message on screen, copied out or screenshotted
  • The brand and project name involved
  • The name of the ad or source video, if it's about a specific one
  • Whether it has happened more than once
Before you retry a failed generation a third time

Two attempts is a reasonable test. Beyond that you're more likely to be hitting the same underlying cause than to get a different result — send it to support instead, and include the project name.

Didn't answer it? Ask a human.

Email support@videoforce.ai and tell us what you were trying to do. Screenshots help.

Back to the Resource Center